BSLWP - AS895 200 PLUS VLO ADHESIVE REMOVER
- MSDS: BSLWP
- Manufacturer: ABATEMENT TECHNOLOGIES INC
- Product Name: AS895 200 PLUS VLO ADHESIVE REMOVER
- National Stock Number: 6850-00F030801
Product Identification
Product ID:AS895 200 PLUS VLO ADHESIVE REMOVER
MSDS Date:03/01/1992
FSC:6850
NIIN:00F030801
MSDS Number: BSLWP
Responsible Party
LAWRENCEVILLE, GA 30243
US
Emergency Phone: 404-339-2600
Info Phone: FAX 404-399-2601
Cage: 49294
Contractor
Telephone: 404-339-2600
Cage: 49294
Ingredients
ALIPHATIC PETROLEUM DISTILLATES
CAS: 64741-77-1
Fraction By Weight: >95%
ACGIH TLV: 5 MG/CUM
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN & EYE IRRITANT.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER. INGESTION:
DRINK PLENTY OF MILK OR OTHER LIQUID. CALL PHYSICIAN IMMEDIATELY.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:>200F
Extinguishing Media:DRY POWDER, FOAM, CO2
Fire Fighting Procedures:AVOID USE OF WATER AS IT MAY SPREAD FLAME.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID. VAPORS CAN IGNITE.
Accidental Release
Spill Release Procedures:SMALL: WIPE UP PRODUCT, RINSE SOILED AREA
W/WATER DOWN THE DRAIN. LARGE: STOP LEAK AT SOURCE & COLLECT INTO
SUITABLE CONTAINER, THEN TREAT AS SMALL SPILL.
Handling
Handling and Storage Precautions:HANDLE AS A COMBUSTIBLE LIQUID. VAPORS
CAN IGNITE, STORE AWAY FROM IGNITION SOURCES. ALWAYS STORE UNUSED
PORTION IN ORIGINAL CONTAINER W/CAP SECURED.
Other Precautions:AVOID TEMPERATURE EXTREMES. ALL HANDLING EQUIPMENT
SHOULD BE ELECTRICALLY GROUNDED. AS W/ALL CHEMICALS, USE W/DUE CARE
ACCORDING TO LABEL INSTRUCTIONS & PRECAUTIONS.
Exposure Controls
Respiratory Protection:IF VAPOR CONCENTRATIONS BECOME HIGH, USE GENERAL
PURPOSE ORGANIC VAPOR MASK
Ventilation:LOCAL EXHAUST
Protective Gloves:NON-POROUS RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES OR FACESHIELD
Supplemental Safety and Health
PRODUCT IS SOLUBLE ONLY IN TRACE QUANTITIES. PH (10% EMULSION): 5-7.
Chemical Properties
Boiling Pt:B.P. Text:390F
Vapor Pres:<1
Vapor Density:8
Spec Gravity:0.810
pH:SUPPL.
Evaporation Rate & Reference:(WATER = 1): <1
Solubility in Water:EMULSIFIES; SEE SUPP
Appearance and Odor:CLEAR YELLOW LIQUID W/CHARACTERISTIC ODOR
Percent Volatiles by Volume:98.5
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:SPARKS, OPEN FLAME & EXTREME TEMPERATURES
Conditions to Avoid Polymerization:CATALYSTS SUCH AS ALUMINUM CHLORIDE
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.